Skylink Home Security
Skylink Home Security
Skylink WD-434TL Long Range Household Alert Home Business Office Child Security Safety Protection Window Door Sensor Accessory
Skylink Home Security
Copy paste these streamlined instructions into your cellphone...
To Program:
Remove back covers. Plug AC into RECEIVER, see green light.
Press and hold RECEIVER’s LEARN BUTTON for 5 seconds (until green LED & Zone 1 Red LED flash), then release.
Trip SENSOR 1 while Zone 1 Red LED is flashing on RECEIVER. Now press SET BUTTON on the back of the SENSOR. (SENSOR flashes rapidly. RECEIVER flashes red for the zone about 13 times; if not, try pairing again.)
Skylink Home Security
To program a second SENSOR, press RECEIVER’s LEARN BUTTON 5 secs and then again shortly until red LED flashes for Zone 2. Trip the SENSOR while Zone 2 Red LED is flashing. Now press SET BUTTON on the back of SENSOR 2. (SENSOR flashes rapidly. RECEIVER flashes red for zone about 13 times; if not, try pairing again. Often this procedure must be repeated before it works.)When SENSOR(s) are programmed and on standby, the RECEIVER’s green LED will be on solid, and no red LEDs will be on.
Skylink Home Security
- NO MONTHLY FEES and easy DIY (Do It Yourself) installation.
- Add-on/extra sensor, compatible with Skylink Long Range Household Alert & Alarm Systems (Requires HA-434RL receiver to work)
- ALERTS & NOTIFIES when a windows/ doors is opened. Also good for jewelry cases, gun cabinets, liquior cabinets and more.
- - BATTERY POWERED with low battery indication: be informed when the sensor`s battery is low before it stops sending signals
- One HA-434RL Household Alert Receiver (AC/DC adapter included) & Two HA-434TL Indoor/Outdoor Motion Sensor (Battery not included)
- See more product details
No comments:
Post a Comment